TPS-2 Transiente Flächenquelle

The TPS-2 transient plane source is designed to test the absolute thermal conductivity, thermal diffusivity, specific heat of solids, pastes, viscous liquids and powders.

Ideal für solids, pastes, and powders

TPS-2 Transiente Flächenquelle (TPS)
The Transient Plane Source (TPS) for solids, pastes and powders is widely used for accurate measurement of absolute thermal conductivity, thermal diffusivity, specific heat, and thermal effusivity. Conforms to ISO 22007-2: 2015. The TPS-2 has been configured to offer a basic range of 0.01 to 100 W/m•K, with optional max power range of 0.01 to 500 W/m•K.

Eigenschaften

The sensor is electrically connected to a power supply and sensing circuit. A current passes through the sensor and creates an increase in temperature, which is recorded over time. The heat generated is then diffused into the sample at a rate dependent on the thermal transport characteristics of the material.
TPS Sensor

Transiente Flächenquelle (TPS) Sensor

The TPS sensor designed for solids, pastes, and powders is comprised of a double-spiral of nickel encapsulated between layers of insulation. Standard operation of this sensor (Two-Sided) is sandwiched between two pieces of the same sample, with expanded use to Single-Sided sensor, which only requires one piece of sample (Single-Sided). The TPS calculation model measures the thermal conductivity, thermal diffusivity, volumetric specific heat and thermal effusivity of the sample.

Rohdaten

Berechnungsdaten

Residualdaten

Spezifikationen

Methoden

Transiente Flächenquelle (TPS)

Materialien

Solids, Pastes, Viscous Liquids and Powders

Module testen

3D: Bulk, Anisotropic, Slab |

Allgemein: Spezifische Wärme

Wärmeleitfähigkeit

Basic Range: 0.01 to 100 W/m•K

Max Power Range: 0.01 to 500 W/m•K

Stichprobengröße*

10 x 10 mm to unlimited

Dicke der Probe*

0.1 mm to unlimited

Zusätzliche Eigenschaften

Temperaturleitfähigkeit, | Spezifische Wärme | Wärmeeindringkoeffizient

Sensor Contact Resistance (m²K/W)

Manually removed

Temperaturbereich

-75 to 300 °C

Test Time

2 to 160 seconds

Daten-Punkte

Bis zu 600 Punkte / Sekunde

Genauigkeit der Wärmeleitfähigkeit

5%

Reproduzierbarkeit

2%

Beispiel-Konfiguration

Symmetric (Two-Sided) |

Asymmetric (Single-Sided)

Normen

ISO 22007-2:2015

*Basierend auf dem verwendeten Testmodul.

TPS Sensoren

TPS Symmetric (Two-Sided) Sensor

TPS Symmetric (Two-Sided) Sensor

Sensor following classic configuration for testing of solids, pastes and powders, with one sample half on top and bottom, sandwiching the sensor. This forms a semi-infinite medium.

Available: 2, 3.2, 6.4, 10 mm radius

rt holder
TPS-Symmetric Single-Sided Sensor

TPS Asymmetric (Single-Sided) Sensor

The TPS single-sided sensor offers excellent accuracy and repeatability without the requirement of two pieces of sample. This is a very convenient sensor for testing large, hard-to-handle samples.

Available: 3.2, 6.4, 10 mm radius

TPS Asymmetric (Single-Sided) Sensor

TPS Modules

Thermtest bietet eine wachsende Auswahl an Testmodulen, die nach ihrer Testtheorie gruppiert sind.

3-Dimensional

3-Dimensional Standard Module

Normen

Bulk thermal conductivity, thermal diffusivity, specific heat and thermal effusivity.

Basic Thermal Conductivity: 0.01 to 100 W/m•K
Optional Max Power Thermal Conductivity: 0.01 to 500 W/m•K

3-Dimensional Anisotropic

Anisotrop

In-plane and out-of-plane thermal conductivity and thermal diffusivity.

Basic Thermal Conductivity: 0.01 to 100 W/m•K in both axial and radial direction to the sensor plane
Optional Max Power Thermal Conductivity: 0.01 to 500 W/m•K in both axial and radial direction to the sensor plane

Slab 3-Dimensional Module

Platte

Isolated in-plane, for thermal conductivity, thermal diffusivity and volumetric specific heat for thin, conductive sheets.

Basic Thermal Conductivity: 0.1 to 100 W/m•K
Optional Max Power Thermal Conductivity: 0.1 to 500 W/m•K
Thickness Range: 0.1 to 5 mm

General

1-Dimensional TPS module

Spezifische Wӓrme

High accuracy direct measurement of specific heat. Various cell dimensions available, for improved accuracy of heterogenous materials.

Standard Test Cell: 20 mm diameter x 5 mm high

Vergleich der Modelle für transiente Flächenquellen (TPS)


MP-1 mit TPS

TPS-2

TPS-3

TPS-4

Modelle

MP-1 mit TPS

TPS-2

TPS-3

MP-2 mit TPS-4

Wärmeleitfähigkeit

0,005 bis 1800 W/m•K

0,01 bis 100 | 0,01 bis 500 W/m•K

0,03 bis 80 W/m•K

0,03 bis 5 W/m•K

Zusätzliche Eigenschaften

Temperaturleitfähigkeit, Spezifische Wärme, Wärmeeindringkoeffizient, Kontaktwiderstand

Temperaturleitfähigkeit, Spezifische Wärme, Wärmeeindringkoeffizient

Temperaturleitfähigkeit, Spezifische Wärme, Wärmeeindringkoeffizient

Nein

Stichprobengröße

5 x 5 mm bis unbegrenzt

10 x 10 bis unbegrenzt

40 x 40 bis unbegrenzt

35 x 35 bis unbegrenzt

Dicke der Probe

0,01 mm bis unbegrenzt

0,1 bis unbegrenzt

5 bis unbegrenzt

5 bis unbegrenzt

Testzeit (Sekunden)

0.25, 0.5, 1, 2, 3, 4, 5, 10, 20, 40, 80, 160, 320, 640, 1280

2, 3, 4, 5, 10, 20, 40, 80, 160

10, 20, 40, 80, 160

20 und 40

Temperaturbereich

Raumtemperatur

0 bis 300 °C

-160 | -50 | -20 | 0 bis 300 °C

Raumtemperatur

0 bis 300 °C

-75 bis 200°C

Raumtemperatur

10 bis 80°C

Raumtemperatur

10 bis 40°C

Zweiseitiger (symmetrischer) Sensor

Ja

Ja

Ja

Nein

Einseitiger (asymmetrischer) Sensor

Ja

Ja

Nein

Ja

TPS Zweiseitiger Sensor (Radius, mm)

0.5, 0.8, 2, 3.2, 6.4, 10, 15, 30

2, 3.2, 6.4, 10

10

6,4

Kontaktwiderstand (Einheiten)

Gemessen und Manuell

Manuell

Manuell

Automatisch

Masse - 3D Wärmeleitfähigkeit

Ja

Ja

Ja

Ja

Anisotrope Wärmeleitfähigkeit

Ja

Ja

Nein

Nein

Wärmeleitfähigkeit von Brammen

Ja

Ja

Nein

Nein

Direkte spezifische Wärme

Ja

Ja

Nein

Nein

1-D-Wärmeleitfähigkeit

Ja

Nein

Nein

Nein

Dünnfilm/Beschichtungen

Ja

Nein

Nein

Nein

Integrierter Schalter (x4 Kanäle)

(x 4 channels)

Ja

Nein

Nein

Nein

Temperatur-Plattformen

Ja

Nein

Nein

Nein

Öfen - automatisiert

Ja

Ja

Nein

Nein

Optionale THW-Methode für flüssige Medien

Ja

Nein

Nein

Ja

ISO 22007-2-konform

Ja

Ja

Nein

Nein

TPS Zubehör

fan furnace

Umluftofen

Zweisitiger Sensor

TPS Two-Sided Sensor

Zweiseitiger Sensor für genaue Labortests

Extended TPS-Sensors

Verlängerte TPS-Sensoren

compression stand and temperature

Kompressionsständer + Temperatur

Environmental Chamber

Environmental Chamber

Single-Sided Sensor

TPS Single-Sided Sensor

Federbelasteter Sensor zum Testen großer Proben oder wenn nur ein Stück Probe verfügbar ist.
Küvetten testen

Küvetten testen

PREISERHALTUNG.
SCHNELL, KOSTENLOS, UNVERBINDLICH.

Füllen Sie einfach das Formular aus und schicken Sie es ab. Eines unserer qualifizierten Teammitglieder wird sich mit Ihnen in Verbindung setzen und Ihnen ein auf Ihre Bedürfnisse zugeschnittenes Angebot unterbreiten.

    Ihre Privatsphäre ist uns wichtig. Wir behandeln Ihre Daten mit großer Sorgfalt und werden sie niemals verkaufen oder missbrauchen. Weitere Einzelheiten finden Sie in unserer Datenschutzrichtlinie..