TPS-3 Source plane transitoire

A transient plane source (TPS-3) for testing the thermal conductivity, thermal diffusivity and specific heat of solids, pastes and powders for customers with a limited budget.

Idéal pour solids, pastes, and powders

transient plane source (TPS-3)

Caractéristiques

We have designed the transient plane source (TPS-3) for testing the thermal conductivity, thermal diffusivity and specific heat of solids, pastes and powders for customers with a limited budget. The TPS-3 includes the standard TPS Sensor and software for use in combination with the Keithley 2400/2401 Source Meter. The TPS-3 can be offered as a package with a Keilthley meter or for use on your own Keithley meter.

The basic theory is that the sensor, which is sandwhiched between two pieces of the same sample, is electrically connected to a power supply and sensing circuit. A current passes through the sensor and creates an increase in temperature, which is recorded over time. The heat generated is then diffused into the sample at a rate dependent on the thermal transport characteristics of the material.

TPS-3 Features

Caractéristiques du MP-1

Matériaux

Solides, pâtes et poudres

Capacités de mesure

Propriétés de masse

Conductivité thermique

0.03 to 70 W/m•K

Propriétés supplémentaires

Diffusivité thermique et Chaleur spécifique

Temps de mesure

10 to 160 seconds

Plage de Température

10 à 80°C

Reproductibilité

Typically better than 2%

Précision

Typically better than 5%

Diamètre du capteur

20 mm

Smallest Sample Size

40 mm diameter x 5 mm

La plus grande taille d'échantillon

Illimité

Testing Sensors and Applications

Standard TPS Sensor

Standard TPS Sensor

Standard 20 mm diameter TPS Double Spiral Sensor (Model 46171).
Thermal Conductivity of Insulation

Thermal Conductivity of Insulation

Room temperature measurement of NIST EPS 1453 was 0.032 W/m·K, RSD 0.65%, compared to expected value of 0.0332 W/m·K. Accuracy of 3.6%.
Glass thermal conductivity testing

Thermal Conductivity of Glass

Room temperature measurement of Pyrex Glass was 1.17 W/m·K, RSD 1.5%, compared to expected value of 1.15 W/m·K. Accuracy of 1.7%.
Thermal Conductivity of Stainless Steel 316

Thermal Conductivity of Stainless Steel 316

Room temperature measurement of Stainless Steel 316 was 13.81 W/m·K, RSD 1.2%.

Comparaison des modèles de sources planes transitoires (TPS)


MP-1 avec TPS

TPS-2

TPS-3

TPS-4

Modèles

MP-1 avec TPS

TPS-2

TPS-3

MP-2 avec TPS-4

Plage de conductivité thermique

0,005 à 1800 W/m•K

0,01 à 100 | 0,01 à 500 W/m•K

0,03 à 80 W/m•K

De 0,03 à 5 W/m•K

Propriétés supplémentaires

Diffusivité thermique, Chaleur spécifique, Effusivité thermique, Résistance de contact

Diffusivité thermique, Chaleur spécifique, Effusivité thermique

Diffusivité thermique, Chaleur spécifique, Effusivité thermique

Non

Taille de l'échantillon

5 x 5 mm à illimité

10 x 10 mm à illimité

40 x 40 mm à illimité

35 x 35 mm à illimité

Épaisseur de l'échantillon

0,01 mm à illimité

0,1 mm à illimité

5 mm à illimité

5 mm à illimité

Durée du test (secondes)

0,25, 0,5, 1, 2, 3, 4, 5, 10, 20, 40, 80, 160, 320, 640, 1280

2, 3, 4, 5, 10, 20, 40, 80, 160

10, 20, 40, 80, 160

20 et 40

Plage de Température

Température ambiante de

De 0 à 300°C

-160°C | -50°C | -20°C | 0 à 300°C

Température ambiante de

De 0 à 300°C

-75 à 200°C

Température ambiante de

10 à 80°C

Température ambiante de

10 à 40°C

Capteur à deux faces (symétrique)

Oui

Oui

Oui

Non

Capteur simple face (asymétrique)

Oui

Oui

Non

Oui

Capteurs TPS (Rayon, mm)

0,5, 0,8, 2, 3,2, 6,4, 10, 15, 30

2, 3,2, 6,4, 10

10

6,4

Résistance du contact (Unités)

Mesuré et Manuel

Manuel

Manuel

Automatique

Conductivité thermique en vrac - 3D

Oui

Oui

Oui

Oui

Conductivité thermique anisotrope

Oui

Oui

Non

Non

Conductivité thermique des dalles

Oui

Oui

Non

Non

Chaleur spécifique directe

Oui

Oui

Non

Non

Conductivité thermique 1-D

Oui

Non

Non

Non

Couche mince/revêtements

Oui

Non

Non

Non

Commutateur intégré

(x 4 channels)

Oui

Non

Non

Non

Appareils de Température

Oui

Non

Non

Non

Fours - Automatisés

Oui

Oui

Non

Non

Méthode THW optionnelle pour les liquides

Oui

Non

Non

Oui

Conforme à la norme ISO 22007-2

Oui

Oui

Non

Non

OBTENEZ UN PRIX.
RAPIDE, GRATUIT ET SANS ENGAGEMENT.

Il suffit de remplir le formulaire et de le soumettre. L'un des membres qualifiés de notre équipe vous contactera pour vous proposer un prix adapté à vos besoins.

    Votre vie privée est importante pour nous. Nous traiterons vos données avec le plus grand soin et ne les vendrons ni ne les utiliserons jamais à mauvais escient. Pour plus de détails, veuillez consulter notre politique de confidentialité.